I do wonder if that's what caused the hangup on the router connecting properly and if that's why the flushDNS command worked.... They will walk you through the process of changing your administrator settings via the Linksys url http://192.168.1.1 (this is the ip address of the router) Don't change the settings on your Ask a question and give support. TechSpot is a registered trademark. my review here
I have been trying to connect my new work laptop to my wireless network at home for 6 months with no luck, my last laptop worked fine. Tell your state representative to support S618. I would have never thought of MAC cloning (nor, do I think my provider would have). steps start button > run > services.msc > ok > wireless zero configuration > R click > properties > check for "service status: stoppped" > click "start" below it > ok http://community.linksys.com/t5/Wireless-Routers/WRT54G-Wired-fine-wireless-not-working/m-p/220956
solved My ethernet and Linksys wireless adapter are both experiencing the same problem. You could leave one computer running and share it's connection as well, but that would be a waste of a computer and probably more power use also, which would accomplish the thanks Lucas, USA, Michigan See more Trouble with Linksys WRT54G router Failed to get ip address linksys wireless router Linksys WRT54G router - Unable to find the Network security key Linksys Any helpful suggestions please would be appreciated?
It could just be your computer¶ Sometimes, the router is not at fault when the interent stops working. I connected via network cable my linksys router to my laptop2. Mark! How To Fix Wifi Router Connection If the damage has been done to the Blue Plastic Casing then you can replace it.
So I was dealing with system issues as well and I'm still not quite sure how I accomplished it, but I'm wireless at last! My Linksys Router Is Not Working it's got lots of problems. Chances are that the router will fail to connect to the internet. https://community.linksys.com/t5/Wireless-Routers/WRT54GL-Wireless-not-working-wired-works-fine/td-p/23986 Helpful +1 Report kdog killa killa Jan 7, 2010 at 05:50 PM I had a similar problem and the solution was simple.
There are usually good information on there. Linksys Router Not Working All Lights On All Rights Reserved. Thank you for taking your time to post these simple instructions here. Thank u again!!
After the computers restarted I had a wireless connection to my laptop computer. http://community.linksys.com/t5/Wireless-Routers/WRT54G-Wireless-Not-Working/m-p/288032 GOOD LUCK!!!!!!!!!!!! Linksys Router Not Connecting To Internet thanx again... Linksys Wireless Router Help I tried holding down the rear reset button which apparently made it lose its "protected status" but it didn't fix the problem of the signal getting dropped.
Thank you so much for documenting the problem. http://vgvinc.com/linksys-router/losing-connecting-on-wireless-linksys-router.php Report marilyn- Jul 16, 2010 at 09:25 AM Got it!!!! to have the device replaced you need have your reciept or else they don't replace it and you have to pay for shipping the defective product. If the internet works, it's your router that's on the fritz.2To get the internet functioning again, turn off the computer(s) and unplug the modem and router. Linksys Router Troubleshooting Blinking Lights
Report robort1961- May 26, 2016 at 04:12 PM You saved me, thank you so very much! Helpful +1 Report Amanda Jun 15, 2010 at 03:20 PM I am having the same problem with my Linksys router! Helpful +2 Report thankfulforforums Oct 25, 2008 at 11:09 PM The clone feature solved my headache! http://vgvinc.com/linksys-router/linksys-router-wrt54g-dissconnection-issue.php if you have the opion of having it replaced, do it..
Found this board waaayyy too late! Router Wifi Not Working Ethernet Does The flushDNS worked for that. Any "layman's" help you can give is Greatly appreciated.
But will not connect to the internet with WEP security on. How do I set it up?? Report CompStpd- Mar 10, 2010 at 12:01 AM My home computer was working so slowly and that worked great! Linksys Wireless Adapter Not Working I would suggest not to buy any product from linksys since there customer service is really bad and also not to buy the wrt54g...
I thought I knew the password/key because linksys won't tell you that it is wrong, it will show full signal strength but no connectivity. Stand up for your right to repair. The router was connecting wirelessly but I could not connect to URLS, only IPs in the browser. useful reference In our case, at 3:30 yesterday, all internet connectivity just stopped.
Thank u! The wireless was fine. Any help would be apreciated Report Btroisi13- Jul 25, 2008 at 09:29 PM Set the secutirty to WPA personal. THANKS AGAIN!!
If you are online through wired connection then unplug the cable from your computer to router and keep a minimum of 3 feets of distance between the router and computer (at Please help!! Register now Not a member yet? Thanks.
Let it sit for 10 seconds, and plug it back in. If I try to enable WAP or WPA Personal, it will not allow me to connect to the internet. Everything was working great before today, and then the internet was all the sudden slow and you fixed that, but I can't figure out what to do to get my laptop So you can fix the stuff you own quickly—and get back on with your life.
Take Action It's time to speak out for your right to repair Dear Nebraskans, This year, the people of Nebraskans have a chance to guarantee their right to repair their equipment—like Jul 17, 2009 at 06:49 PM This message board is too funny! Keep in mind that you must have the airport utility turned on which you will most likely find at the top right of the screen. We have a chance to help the environment and stand up for local repair jobs—the corner mom-and-pop repair shops that keep getting squeezed out by manufacturers.