Home > Hard Disk > Is It Posssible To Change Max. Addressable Sectors Of IDE Hard Disk Under Windows?

Is It Posssible To Change Max. Addressable Sectors Of IDE Hard Disk Under Windows?

Contents

Reply Larry Osterman [MSFT] says: November 30, 2011 at 11:01 am @jamome: Read this: msdn.microsoft.com/…/aa365433(v=VS.85).aspx for more information on oplocks. You will NOT be using any of the space above that, and that cannot cause trouble. First you install the new Seagate in your machine on an IDE port with its jumpers adjusted appropriately. And so far no product has impressed me more than XP. http://vgvinc.com/hard-disk/hard-disk-problems.php

Despite their differences, we call a SCSI, PATA, or SATA card a host interface adapter instead of a controller card because the actual controllers are inside the drives. LBA-assisted translation[edit] When the BIOS is configured to use a disk in LBA-assisted translation mode, the BIOS accesses the hardware using LBA mode, but also presents a translated CHS geometry via The system returned: (22) Invalid argument The remote host or network may be down. You MUST be sure to specify that you are operating on the right HDD unit!

Cylinder Head Sector Calculator

If I did it with the 500GB drive could that cause problems, or can you reformat just one partition of a drive?Thanks again for posting this information - I'm definitely considering lol)Although this makes sense, have you seen this Microsoft document for Windows 2000:http://support.microsoft.com/kb/305098It's not for XP so maybe it doesn't apply at all, but if you look under "If you enable Instead, you need to click on the taskbar thumbnail itself to access that window. If any more info is needed let me know.Here's what AIDA32 says about my current hard drive: Quote: ATA Device Properties Model ID SAMSUNG SP1213NSerial Number [snip]Revision TL100-30Parameters 232632 cylinders, 16

But if scanning applications all universally used oplocks, it would alleviate the problem you describe. This means the reported number of heads never exceeds 16 (0–15), the number of sectors can be 255 (1–255; though 63 is often the largest used) and the number of cylinders Read Cisco CCENT/CCNA ICND1 100-101 Official Cert Guide or more than 24,000 other books and videos on Safari Books Online. Lba To Chs Calculator If you load the fdisk program from an old Windows 9x boot disk, a message says "Your computer has a disk larger than 512 MB.

Old BIOS-based PCs and older Macs have a 2 TB ceiling, and the workaround is a PC or Mac that uses EFI and runs a 64-bit operating system. Cylinder Head Sector Addressing Apple did is in 10.6, you should do it as well so everyone is using the same system. I'll try to post that info later today when I have a chance.I mentioned in my OP that I thought about a sata and controller card but I've decided I would Instructions are here:http://www.howtohaven.com/system/slipstream-xp-service-pack-3.shtmlFood for thought:Instead of getting the 500GB IDE drive, you might purchse an SATA HDD and also get a converter to convert IDE to SATA:You can see that product

Reply Larry Osterman [MSFT] says: November 30, 2011 at 8:10 am @jader3rd: Since NT 3.1, NT has had a construct called an opportunistic lock (or oplock) which gives you exactly what 48 Bit Lba And let's be honest, it's the consumers who will drive the growth of this platform and OS. Reply Kirill says: November 30, 2011 at 1:54 am Tell us about the new 'Protogon' file-system. Windows XP requires Service Pack 1 for drives over 128 GB.

Cylinder Head Sector Addressing

However, I disagree that consumer momentum will be more important after W8 ships - that game changed years ago, and it's that mentality that makes MSFT behind the curve at the https://books.google.com/books?id=sy2lCgAAQBAJ&pg=PA129&lpg=PA129&dq=Is+it+possible+to+change+max.+addressable+sectors+of+IDE+hard+disk+under+windows?&source=bl&ots=_ZkjU2s9g9&sig=Y4B4GniqOlS-wbowpNzwXFoNajc&hl=en&sa=X& Ask a Question See Latest Posts TechSpot Forums are dedicated to computer enthusiasts and power users. Cylinder Head Sector Calculator The PC/AT shipped with a 20MB hard drive and shipped with DOS 3.x which introduced FAT16 allowing much small cluster sizes. How To Calculate Hard Disk Capacity Thanks.

The original IDE specification supported 22-bit logical block addressing, which supported a maximum drive size of 2.1 GB (2.0 GiB). http://vgvinc.com/hard-disk/hard-disk-damage-what-is-this.php Reply ZipZapRap says: November 30, 2011 at 10:10 pm @jader3rd Fair point, and I agree.. addressable sectors of IDE hard disk underwindows???? I'd certainly recommend up to SP3. Lba Addressing

In other words, all programs gets launched in their own sandboxed view of a kind of simple key/value store filesystem. SATA), but apparently there's no automatic data tiering, and nothing is mentioned about employing RAM and SSD as part of the filesystem. Either create a new FS with these ingredients (if possible), add them to NTFS (if create a new FS is not possible) or the last, license ZFS & port it to click site My Chaintech Apogee 7VJL motherboard obviously only supports IDE/PATA/ATA/whatever (it's all the same right?).

Archived from the original on 6 October 2013. Scsi in sho Mein KontoSucheMapsYouTubePlayNewsGmailDriveKalenderGoogle+ÜbersetzerFotosMehrShoppingDocsBooksBloggerKontakteHangoutsNoch mehr von GoogleAnmeldenAusgeblendete FelderBooksbooks.google.de - In the digital world, the need to protect online communications increase as the technology behind it evolves. Checksum defeated.

The solution was to use conversion software such as OnTrack Disk Manager, EZDrive, etc., which installed to the disk's OS loader and replaced INT13h routines at boot time with custom code.

Windows 8 needs a new file system not a patched version of NTFS. What value would cryptographic checksums of the filesystem blocks gain? Mailing Lists Mailing lists Feeling really retro today? Maybe Microsoft should have expanded Windows Phone 7 to tablets rather than Windows 7 to tablets.

I knew nothing about hard drives etc. Although ATA is the official name of the interface, IDE is a marketing term originated by some of the drive manufacturers to describe the drive/controller combination used in drives with the Reply [email protected] says: November 30, 2011 at 11:23 pm @sreesiv "I guess it should be n = ( (total capacity in bytes)/ (sector size in bytes) - 1) considering sector number navigate to this website So that's not a reliable option.

I would prefer to see this functionality at the filesystem level. And starting in 1999, no new Macs shipped with SCSI ports by default, although some Power Macs could be ordered with a SCSI PCI card. What you certainly CAN do is to run SCANDISK on the drive. The low six bits of the CL register stored the number of sectors and the extra two bits not used in CL were tacked onto the front of the 8 bits

The outside half of a whole Hard Drive would be the first half of the drive. Donations Donations This Month If Low End Mac helps you, help us keep Low End Mac running with a donation during our Big Fund Raiser! SATA data cables are much smaller than those used by PATA, whereas the power cables are similar in size. Most ATA drive manufacturers publish their drive-formatting/initialization software on their websites.

Some areas of the ATA standard have been left open for vendor-specific commands and functions. Mac OS X Maximum Drive Capacity OS X 10.0-10.1.5, 2 TB maximum volume size OS X 10.2-10.2.8, 8 TB OS X 10.3-10.3.9, 16 TB OS X 10.4 and later, around 8 I know there are shell extensions that do a good job but native support of junctions in Explorer would mean it can for example correctly calculate the size of WinSxS. The earliest IDE drives were called hardcards and were nothing more than hard disks and controller cards bolted directly together and plugged into a slot as a single unit.

This is, of course, a typical example of Microsoft's ham-handed UI design. All the way up to the top level of the filesystem (in ZFS the uberblock). Therefore, all compatible BIOSes will use mappings with up to 255 heads (00h..FEh) only, including in virtual 255×63 geometries. The above mentioned pointers also provide more information about our new approach vis-a-vis CHKDSK." Then my fears are confirmed-there's no support for volumes > 16 TB unless you increase the cluster

In particular, check the size of the Partition it will make on the DESTINATION drive to receive the clone copy. no special ".", "..", "NUL", "PRN", etc. The newer ESDI Hard Disk Drive Interface supported up to 256 heads, up to 4096 Cylinders, and up to 256 Sectors per Track. A 64 TB file share achieved via 16K allocation unit size is not really a win." - NTFS currently supports cluster sizes up to 64K which, in turn, enable very large

If you can, what you do then is rename the file to something you'll never use like "badjnk01.fil", then try to find a good copy of that file somewhere else and